Measuring And Adjusting Water Hardness - Philips HD8930/02 Operating Instructions Manual

ENGLISH
12
MENU
BEVERAGE MENU
MACHINE MENU
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE

Measuring and Adjusting Water Hardness

Measuring water hardness is very important in order to correctly manage
the "INTENZA+" fi lter and the frequency with which the machine must be
descaled.
1 Immerse the water hardness test strip - provided with the machine - in
water for 1 second.
Note: The test strip is only valid for one measurement.
2 Check how many squares change colour and refer to the table.
Note: The letters correspond to the references that are located in the base of
the Intenza fi lter. The fi lter must be adjusted according to this measurement.
3 The numbers correspond to the settings indicated in the following
machine adjustments.
More precisely:
1 = (very soft water)
2 = (soft water)
3 = (hard water)
4 = (very hard water)
4 Hold the " " button pressed for 5 seconds to access the program-
ming mode.
5
To select the "MACHINE MENU" option, press the "
Press the " " button for access.
6 Press the " " button until the "WATER MENU" option can be selected.
Press the " " button for access.
" button.