Setting The Language (Upon First Use); Warm-Up And Rinsing - Philips HD8930/02 Operating Instructions Manual

LANGUAGE
ITALIANO
ENGLISH
DEUTSCH
FRANÇAIS
HEATING UP...
RINSING
ESC
STOP RINSING

Setting the Language (Upon First Use)

At fi rst start up, the machine requires you to select and store the desired
language for the displayed messages. This allows you to adjust the pa-
rameters of the beverages to the typical parameters of the country where
the machine is used. This is why some languages are diff erentiated also by
country.
If no language is selected, you will be requested to select it at next ma-
chine start-up.
1
Select the language by pressing the "
2 Press the " " button to store the language.

Warm-up and Rinsing

1
Upon start-up, the machine activates the warm-up phase. Wait until it
is completed.
Note: The bar is in progress to show that the machine is heating up the system.
2 Once the warm-up is complete, the machine performs a rinse cycle of
the internal circuits.
Note: The bar is in progress to show that the machine is performing the system
rinse cycle.
A small quantity of water is dispensed. Wait for the cycle to end.
Note: The cycle can be stopped by pressing the "
3
Then, the machine is ready for use.
The logo is displayed indicating that the machine is ready for use.
Note: If the machine is being used for the fi rst time or after a long period of
inactivity, follow the procedures described in the following section.
ENGLISH
" or " " button.
" button.
9