NEO PROTON IP 7 QA User Manual page 6

6. INSTALLATION
Mounting
Proton IP 7 QA may by set up on a solid and even
surface. The unit can also be mounted upside down
to a cross arm. For fixing, stable mounting clips are
required. The mounting place must be of sufficient
stability and be able to support a weight of 10 times
of the unit's weight.
When carrying out any installation, always comply
scrupulously with all the regulations (particularly
regarding safety) currently in force in the country in
which the fixture's being used.
P. 6
Neo Proton IP 7 QA - English version
• Install the projector at a suitable location by
means of the mounting bracket (2).
• Always additionally secure the projector with
the safety rope from falling down. For this
purpose, fasten the safety rope at a suitable
position so that the maximum fall of the projec-
tor will be 20cm.
• Adjust the projector and use the knob to slight-
ly release of tighten the locking mechanism of
the bracket if is necessary (1).