Auto - NEO PROTON IP 7 QA User Manual

White Balance
LED Frequency
Menu Structure (cont'd)
Wireless Setting
Back Light
Key Lock
Information
Reset Factory
W-DMX WIRELESS SETTING
The Proton IP 7 QA features an onboard W-DMX
receiver. By default, W-DMX is OFF. To activate:
• Press the MENU button until the display shows
Wireless Setting, Then press ENTER.
• Press the UP/DOWN buttons to select Receive
On, then press ENTER.
• To reset the onboard W.DMX receiver, select
Receive Reset, then press ENTER.
P. 10
Neo Proton IP 7 QA -
English version
Off
Manual
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25kHZ
Receive On/Off
Receive Reset
On
10S
20S
30S
On
Off
Fixture Hours
Version
No
Yes
Red <125-255>
Green <125-255>
Blue <125-255>
Amber <125-255>
On
Off
No
Yes
Password: Up Down Up
Down Enter
<9999H>
<V1.0>
AUTO SHOW
If no DMX control signal is present at the DMX IN-
PUT, the unit independently runs through its show
programme provided that the blackout mode is
switched off:
• Press the button MENU so many times until the
display shows Auto Show, then press the button
ENTER.
• Press the button UP/DOWN to switch between
the show (Auto 1-5). The unit will operate in
show mode.
Default: Off
Default 1200Hz
Default: Off
Default: No
Default: On
Default: On
Default: No