Mode 4 Ch
Fixture Settings
It is possible to change the parameter values in the
following ways:
DIMMER
•
Enter in Dimmer mode to select specific dim-
ming curve, press the button MENU so many
times until shows Dimmer Mode, and press the
button ENTER to confirm.
•
Press the button UP/DOWN to select Off - Dim-
mer 1 - Dimmer 2 - Dimmer 3.
•
Press ENTER button to store, then press MENU
to return to main menu.
BACKLITE
•
To activate Blacklight display press the button
MENU so many times until shows Back Light,
and press the button ENTER to confirm.
•
Press the button UP/DOWN to selec 0n - 10s -
20s - 30s.
•
Press ENTER button to confirm the selection,
then press MENU to return to main menu.
LED FREQUENCY
•
To adjust the frequency of the LEDs, press
the MENU button repeatedly until the display
shows LED Frequency, and then press the EN-
TER button.
•
Select the frequency (600Hz - 25kHz) using the
UP/DOWN buttons.
•
To confirm, press the ENTER key, then press
MENU to return to main menu.
Fixture Information
Show the fixture working hours.
•
Press the button MENU so many times until
P. 16
Neo Proton IP 7 QA -
English version
1
Red 0~100%
2
Green 0~100%
3
Blue 0~100%
4
Amber 0~100%
Function
shows Information. Press the button ENTER to
confirm.
•
Using the button UP/DOWN to select Fixture
Hours, then press the button ENTER to confirm.
•
Then the display will show the working hours.
Press MENU to return ro main menu.
VERSION
Show the fixture firmware version.
•
Press the button MENU so many times until
shows Information.
•
Select through the button UP/DOWN the Ver-
sion menu voice.
•
The display will show firmware data. PRess
MENU to return to main menu.
TEMPERATURE
•
To read the value of the internal temperature of
the device, press the MENU button repeatedly
until the display shows Temperature, and then
press ENTER button to read the value.
•
Press the MENU button to go back or wait a few
seconds to exit the setup menu.
Amber Balance
Enter the White balance to adjust the Red, Green,
and Blue levels to achieve different whites.
•
Press the button MENU so many times until
shows Amber Balance, and press the button
ENTER to confirm.
•
Select the color R, G, B, A using the UP/DOWN
buttons, the press ENTER.
•
Using UP/DOWN button, select the desired color
value 125-255.
•
Press ENTER button to continue to the next
color R, G, B, A.
•
Continue until the desired mix is obtained.
DMX Value
000-255
000-255
000-255
000-255