Advertisement

Bagged Vacuum
Cleaner with Deep
Cleaning Powerhead
Carbon & HEPA Filtration
Soft Start Motor
Self-Propelling Powerhead
regal

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9001PH Regal and is the answer not in the manual?

Questions and answers

Toni
April 10, 2025

when turning the vacuum on a red light by the on / off button lights up?? Why

1 comments:
Mr. Anderson
April 10, 2025

The red light by the on/off button may light up when turning on the Hoover 9001PH Regal vacuum to indicate an issue such as a blockage, a full dust bag, or a dirty motor or HEPA filter. These conditions can cause the cleaning mode indicator to flash and affect vacuum performance.

This answer is automatically generated

Dieter Berber
April 9, 2025

the bag cover will not close even when i have no bag in there

1 comments:
Mr. Anderson
April 10, 2025

The bag cover on a Hoover 9001PH Regal may not close properly if the dust bag is not fully inserted into the bag holder. Ensure the dust bag is completely in place before closing the cover to avoid dust leakage and ensure the cover clicks shut.

This answer is automatically generated

Dieter Berber
April 9, 2025

the lid will not shut when the bag is replaced, even when there is no bag

Summary of Contents for Hoover 9001PH Regal

  • Page 1 Bagged Vacuum Cleaner with Deep Cleaning Powerhead Carbon & HEPA Filtration Soft Start Motor Self-Propelling Powerhead regal...
  • Page 3: Specifications

    9001PH Regal Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful features built into your vacuum cleaner. We recommend that you carefully read this instruction manual for the best results. Features: Handle Air Inlet 2. On/Off Button (Powerhead) 10.
  • Page 4: Before You Begin

    Before You Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately.
  • Page 5: Safety Precautions And Warnings

    Safety Precautions & Warnings IMPORTANT! Always switch off the cleaner and remove the power plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label.
  • Page 6 16. Do not use the machine to vacuum water or 27. Never attempt to make any modifications liquids, this vacuum is for, dry household use electrically to the vacuum cleaner. only. 28. Always store the appliance indoors in a cool 17.
  • Page 7 Assembly IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories! LIVE PARTS within the hose, rod and powerhead. 1. Flexible Hose Fitting: Insert the flexible hose into the air inlet of the vacuum. Press until it clicks into position. Removing: Press the two buttons and gentle pull to release the flexible hose.
  • Page 8 Accessories Powerhead Powerhead Height Adjustment Button Deeply cleans carpets by effectively lifting and removing deeply embedded dust and dirt. The height of the powerhead can be adjusted to be used on different types of carpets. Note: not recommended for use on hard floors. WARNING! Seek advice from carpet manufacturers before using the motorised powerhead on woollen or delicate carpets.
  • Page 9: Crevice Tool

    Mini Hand Turbo Tool Ideal for removing per hair from upholstery and furniture. This accessory features a transparent case so that you can easily see and remove any blockages that may occur. Safety Precautions: 1. Keep hair, hands and feet away from the rotating brush while the turbo brush is running.
  • Page 10: Dusting Brush

    Dusting Brush Cleaning blinds, bookshelves and lampshades is made easy with this dusting brush. 32-35mm Adaptor Fits all 32mm-35mm vacuums. Upholstery Tool For vacuuming furniture and upholstery. Note: for best performance adjust the suction power to “Curtains” mode. Digital Suction Control The suction power can be regulated by using the Digital Suction Control to achieve optimum cleaning results.
  • Page 11: Instructions For Use

    Instructions For Use Using the Cable Rewind Button and Power On/Off Button Unwind Unwind a sufficient length of cable. The yellow mark on the power cable shows the ideal cable length. DO NOT extend the cable beyond the red mark. Insert the power plug into the power socket.
  • Page 12: Maintenance

    Maintenance IMPORTANT! Always remove the power plug from the power socket before performing any maintenance. Vacuum Cleaner Storage When not in use, ensure that the cleaner is disconnected from to the power supply and that the cable is fully retracted. The combination floor tool can be stored in the floor park clip. The powerhead must be stored separately.
  • Page 13 Remove the dust bag when it is full and replace with a new dust bag. Refit a new dust bag and reinsert the bracket and dust bag assembly by sliding it back into the machine. Gently close the cover, you will hear a ‘click’ when closed properly.
  • Page 14 Maintenance (continued) Cleaning and Replacing the Rear Motor HEPA and Carbon Filter The Rear Motor HEPA and Carbon Filter is installed behind the exhaust grille. This filter is washable, however frequent washing of the carbon filter can reduce the life of the carbon filter. When dust or dirt is visible on the surface of the HEPA filter, the filter should be replaced or washed with lukewarm water to maintain efficient suction.
  • Page 15 Cleaning the Mini Hand Turbo Tool WARNING! Ensure that the Mini Hand Turbo Tool is disconnected from the cleaner when performing any maintenance. Unlock the neck on the Mini Hand Turbo Tool by twisting anti-clockwise. Push the release buttons on the side of the Mini Hand Turbo Tool down to unlock the external bristles.
  • Page 16 Maintenance (continued) Cleaning the Motorised Powerhead WARNING! Ensure that the cleaner is disconnected from the power supply when performing any maintenance procedures. The rotating brush must be free of debris for effective cleaning and for maximum suction. Disconnect the motorised powerhead and turn it over to inspect the rotating brush. If a build-up of debris is wound around the rotating brush, remove by carefully cutting with scissors.
  • Page 17 Firstly lift the side of the rotating brush without the belt attached. Then lift the end cap where the belt loops around. Slide the old belt off the drive shaft and then the end cap. If the belt is broken, remove all the broken pieces.
  • Page 18: Troubleshooting

    Troubleshooting Problems and Solutions If you come across a problem, please use the checklist of troubleshooting tips before ringing Hoover Customer Care. AUS: 1300 360 845, NZ: 0800 387 442 Fault Solutions The cleaner will not turn on. Check that the power plug is inserted securely; remove from the power supply and then reinsert into the power supply.
  • Page 19: Customer Care

    Customer Care Please contact Hoover Customer Care: 1300 360 845 (AUS) 0800 387 442 (NZ) to find your local spare parts provider. Description Product Code Filter Set 32201419 33155362 Hose 31220812 11400168 Powerhead Combination Floor Tool 31155241 Agitator Bar 33701796...
  • Page 20 WARRANTY Deep Cleaning Powerhead Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a two year Hoover Floorcare is unable to accept responsibility under this parts and labour warranty, and a three year motor warranty against...

Table of Contents

Save PDF