Table of Contents
Advertisement
Threading the Lower Looper
Turn off the main power switch and unplug the machine.
Note: Raise the presser foot lifter for easier threading.
Place a thread spool on the very right spool pin. Pull
the thread through the right thread guide from back to
front (A).
Note: If the thread tends to slip away from the guide while
sewing, pass the thread through both thread guide holes as
shown (B).
Slide the thread under the top cover thread guide (C)
as illustrated.
Pull the thread along the threading slit. Using both
hands, insert the thread between the tension disks (D).
Set the lower looper pre-tension setting slider (E) to
NORM.
Pull the thread down along the slit and into the lower
looper thread guide (F).
Pull out approximately 12˝ (30 cm) of thread. Make
sure that the thread does not get tangled around the
lever or the cover.
14 – GETTING READY TO SEW
L
M
A
C
E
A
B
C
D
E
F
J
I
K
G
B
D
F
H
Advertisement
Table of Contents
