Pfaff admire air 5000 User Manual page 21

Pull the thread down along the slit and pass it to the left
through the thread path (E).
Pass the thread from right to left around the take-up lever
(F).
Pass the thread through the right slit of the needle thread
guide (G).
Pass the thread through the needle bar thread guide from
left to right (H).
Thread the right needle from front to back (I).
Note: See page 24 to learn how to use the needle threader.
Pull out approximately 4˝ (10 cm) of thread from the nee-
dle and slide it under the foot so that it runs in between
the foot and the upper cutter.
Close the front cover and lower the presser foot lifter.
E
F
G
H
I
GETTING READY TO SEW – 21