Download Print this page

Date Tehnice; Technical Data - Geo S-Digit mini Instructions Of Utilization

Advertisement

DATE TEHNICE

Domeniu Lucru
Rezolutie
Precizie
Sursa alimentare
Timp Operare
Dimensiuni
Greutate
IMPORTANT
Calibrarea inclinometrului:
- Calibrarea înainte de prima utilizare
- Înainte de mãsurãtori importante
- Dupã o loviturã sau cãdere
- Dupã o fluctuaþie mare a temperaturii
Verificarea Calibrarii
Pozitionati unitatea pe o suprafaþã planã (O
poziþie) þi porniþi. Aþteptaþi 10 sec. þi notaþi
valoarea mãsuratã. Rotiþi unitatea de 180 ° în
poziþia B. Aþteptaþi 10 sec. þi notaþi valoarea
mãsuratã.
Dacã deviaþia dintre cele douã valori este mai
mare de 0,1 ° S-Digit Mini ar trebui sã fie
calibrata.
Cum se calibreaza
Pozitionati unitatea pe o suprafaþã planã (O
poziþie) þi porniþi.
a) Asteptati 10 sec. - Apãsaþi ZERO pentru 5
sec. dupã afiþare prezinta "-0 -" aþteaptã încã
10 sec.
b) Apãsaþi pe ZERO (pe display apare "-1") -
rotiþi cu 180 ° în poziþia B (se afla pe aceeaþi
poziþie ca în A).
c) Asteptati 10 sec. - ZERO apãsaþi o datã
pentru a finaliza procesul de calibrare.
3
4 x 90°
0,1 ° oder 0,1 %
0° + 90° = ± 0,1°
1° - 89° = ± 0,2°
3 x 1,5 V AA
600h
156 x 56 x 31 mm
0,3 kg incl. Baterii

TECHNICAL DATA

Working range
Resolution
Accuracy
Power supply
Operating time
Size
Weight
IMPORTANT
Calibration of inclinometer:
- calibrate before first use
- before important measurements
- after a hit or drop
- after a large fluctuation in temperature
Checking of calibration
Position unit on a flat surface (position A) and
switch on. Wait 10 sec. and note down measured
value. Rotate unit by 180° to position B. Wait
10 sec. and note down measured value.
If deviation between the two values is more than
0,1° S-Digit mini should be calibrated.
How to calibrate
Position unit on a flat surface (position A) and
switch on.
a) Wait 10 sec. – press ZERO for 5 sec. after dis-
play shows „-0-" wait further 10 sec.
b) Press ZERO (display shows „-1") – rotate by
180° to position B (lay on same position as
in A).
c) Wait 10 sec. – press ZERO once more to fina-
lize calibration process.
4 x 90°
0,1 ° or 0,1 %
0° + 90° = ± 0,1°
1° - 89° = ± 0,2°
3 x 1,5 V AA
600h
156 x 56 x 31 mm
0,3 kg incl. batteries

Advertisement

loading