Handle Air Conditioner - Komatsu PC1250-11 Original Instructions Manual

Hydraulic excavator
Table of Contents

Advertisement

HANDLE AIR CONDITIONER

HANDLE AIR CONDITIONER
NOTICE
When performing running-in of the air conditioner, always start with the engine running at low
speed. Never start the air conditioner when the engine is running at high speed. It will cause failure
of the air conditioner.
If water gets into the control panel or sunlight sensor, it may lead to failure. Take care not to let wa-
ter get on them. In addition, never bring any open flame near them.
For the auto function of the air conditioner to work properly, always keep the sunlight sensor clean.
Do not leave anything around the sunlight sensor that may interfere with its sensor function.
When the air conditioner is not used every day, to prevent loss of the film of oil at various parts, run the air con-
ditioner with the engine at low speed from time to time and perform cooling or dry heating for several minutes.
When the temperature inside the cab is low, the air conditioner may not work. In this case, circulate the recircu-
lation air to warm the inside of the cab. After that, turn on the air conditioner switch, and the air conditioner will
work.
If any abnormality is detected in any equipment or sensor used
on the air conditioner, the air conditioner system caution lamp
lights up on the monitor screen. If the air conditioner system
caution lamp lights up, ask your Komatsu distributor for inspec-
tion and repair.
Ventilation while cooling
When running the air conditioner for a long time, turn the lever to FRESH position once an hour to perform
ventilation and cooling.
If you smoke when the air conditioner is on, the smoke may hurt your eyes. In such case, open the window
and turn the lever to FRESH for a while for ventilation and driving smoke out.
Temperature control
For reasons of health, it is said that the optimum setting for cooling is the temperature when it is slightly cool (5
to 6 °C lower than the ambient temperature) when you enter the cab.
Be careful to select the appropriate temperature.
3-198
OPERATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc1250sp-11

Table of Contents