2: Description And Features; Description; Main Features - FIBARO SMART IMPLANT FGBS-222 Operating Manual

2: Description and features
2.1: Description
FIBARO Smart Implant allows to enhance the functionality of wired
sensors and other devices by adding Z-Wave network communication.
You can connect binary sensors, analog sensors, DS18B20 temper-
ature sensors or DHT22 humidity and temperature sensor to report
their readings to the Z-Wave controller.
It can also control devices by opening/closing output contacts inde-
pendently of the inputs.
2.2: Main features
• Allows for connecting sensors:
» 6 DS18B20 sensors,
» 1 DHT sensor,
» 2 2-wire analog sensor,
» 2 3-wire analog sensor,
» 2 binary sensors.
• Supports Z-Wave network Security Modes: S0 with AES-128 en-
cryption and S2 Authenticated with PRNG-based encryption.
• Works as a Z-Wave signal repeater.
• Built-in temperature sensor.
• May be used with all devices certified with the Z-Wave Plus cer-
tificate and should be compatible with such devices produced by
other manufacturers.
The device is a Security Enabled Z-Wave Plus product
i
and a Security Enabled Z-Wave Controller must be
used in order to fully utilize the product.

2: DescrIptIon anD features

5