Table of Contents
Advertisement
6.0 - SIM CARD
7.0 - ALARM UNIT SEALING
!
WARNING
DISCONNECT the alarm unit before carrying out the following operations.
To seal the alarm, position the
rubber cap over the external edge of
the alarm housing as shown below.
PRESS THE YELLOW BUTTON
Pull the plastic rectangular flange
ON THE SIDE OF THE SIM CARD
over the rubber cap and secure with
DRIVE TRAY
the supplied screws.
Do not over tighten the screws.
PULL OUT THE SIM CARD
DRIVE TRAY AND INSERT
THE SIM CARD
Alarm unit sealed
RE-INSERT
THE DRIVE
TRAY AND MAKE SURE IT IS
SECURELY INSERTED
IN THE APPROPRIATE POSITION.
PAGE 6
PAGE 7
Advertisement
Table of Contents
