Safety Requirements - Vents VKM EC User Manual

SAFETY REQUIREMENTS

• Please read the user's manual carefully prior to installing and operating the unit.
• All user's manual requirements as well as the provisions of all the applicable local and national
construction, electrical, and technical norms and standards must be observed when installing
and operating the unit.
• The warnings contained in the user's manual must be considered most seriously since they
contain vital personal safety information.
• Failure to follow the rules and safety precautions noted in this user's manual may result in an
injury or unit damage.
• After a careful reading of the manual, keep it for the entire service life of the unit.
• While transferring the unit control, the user's manual must be turned over to the receiving
operator.
• Disconnect the unit from
power mains prior to any
installation operations.
• The unit must be grounded!
• Do not change the power
cable length at your own
discretion.
• Do not bend the power cable.
• Avoid damaging the power
cable.
• Do not put any foreign objects
on the power cable.
• Do not use damaged
equipment or cables when
connecting the unit to power
mains.
• Do not touch the unit controls
with wet hands.
• Do not carry out the
installation and maintenance
operations with wet hands.
www.ventilation-system.com
UNIT INSTALLATION AND OPERATION SAFETY PRECAUTIONS
• Unpack the unit with care.
• While installing the unit, follow
the safety regulations specific
to the use of electric tools.
• Do not lay the power cable of
the unit in close proximity to
heating equipment.
• Do not operate the unit
outside the temperature range
stated in the user's manual.
• Do not operate the unit
in aggressive or explosive
environments.
• Do not wash the unit with
water.
• Protect the electric parts of the
unit against ingress of water.
3