Monitoring Your Baby Silently - Philips SBCSC490/00 Instructions For Use Manual

XP SBC SC 490 14-02-2003 16:43 Pagina 13
Switching the system check alarm on or off
The system check alarm on the Parent Unit beeps when the units are not
in touch.The alarm can be switched on or off.
1 Open the Parent unit 's battery compartment cover.
2 Set the switch inside the compartment to the desired position
( - ON or - OFF).
3 Close the battery compartment cover.
> The SYSTEM check light can still flash even if the system check alarm is
switched off.
Monitoring your baby
1 Make sure all connections have been properly made.
2 Switch on all units.
3 Switch on your TV.
4 Select External input on the TV.
> You can watch and listen to your baby at any desired moment.

Monitoring your baby silently

• Adjust the volume on the Parent Unit to the lowest level using the
ON VOLUME OFF control (16) on the Parent Unit (do not switch off).
> The sound-LEVEL lights (13) visually alert you to baby's sounds.
The more sound your baby makes, the more lights light.
ENGLISH 13