Table of Contents
Advertisement
1 Introduction
1.2 Typographical conventions
1.2.1 Warnings
V
A
E
1.2.2 Note signs
H
v
1
abc
h
8
The signs for Danger and Caution are used in this manual under the following
conditions:
Danger
This symbol is used where there may be danger to personnel if the instruc-
tions are disregarded or not followed accurately!
Caution
This symbol is used where there may be damage to equipment or data if the
instructions are disregarded or not followed accurately!
Caution
This symbol is used if precautions must be taken when handling electrostati-
cally sensitive components.
Note
This symbol is used to draw your special attention to a remark.
Reference
This symbol refers to additional information in other manuals, chapters or
sections.
Footnote
Footnotes are comments that refer to specific parts of the text. Footnotes
consist of two parts:
1) The marking in the text, arranged as continuous superscript numbers.
2) The footnote text at the bottom of the page, in a smaller typeface than the
main text, and preceded by a number and a stop.
Handling instructions
This symbol marks the description of a required action.
The individual steps are indicated by asterisks, for example:
h Disconnect the instrument completely from the supply
h Remove the instrument cover
Power units 05.01
Advertisement
Table of Contents
