Broadcasting Transmission; Broadcasting Address; Monitor Address; Reset - Ebyte E30-433T20S3 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

5.2 Broadcasting transmission

5.3 Broadcasting address

For example: Set the address of module A as 0xFFFF or 0x0000, and the channel as 0x04;

When module is the transmitter (transparent transmission), all modules under channel 0x04 will receive the data,

the purpose of broadcast is realized.

5.4 Monitor address

For example: Set the address of module A as 0xFFFF or 0x0000, and the channel as 0x04;

When module A is the receiver, it can receive the data sent from all modules under channel 0x04, the purpose of

monitor is realized.

5.5 Reset

When the module is powered, AUX outputs low level immediately, conducts hardware self-check and sets the operating
mode based on user's parameters. During the process, the AUX remains low level. After the process completed, the AUX
outputs high level and starts to work as per the operating mode combined by M1 and M0. Therefore, users need to wait
the AUX rising edge as the start of module's normal work.
Copyright ©2012–2018，Chengdu Ebyte Electronic Technology Co.,Ltd.
E30-433T20S3 User manual
6