Ber(Bit Error Rate) Is High; Production Guidance; Reflow Soldering Temperature - Ebyte E30-433T20S3 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

9.3 BER(Bit Error Rate) is high

There are co-channel signal interference nearby, please be away from interference sources or modify frequency and

channel to avoid interference;
Poor power supply may cause messy code. Make sure that the power supply is reliable.

The extension line and feeder quality are poor or too long, so the bit error rate is high;


10. Production guidance

10.1 Reflow soldering temperature

Profile Feature
Solder Paste
Preheat Temperature min （Tsmin）
Preheat temperature max (Tsmax)
Preheat Time (Tsmin to Tsmax)(ts)
Average ramp-up rate(Tsmax to Tp)
Liquidous Temperature (TL)
Time（tL）Maintained Above（TL）
Peak temperature（Tp）
Aveage ramp-down rate（Tp to Tsmax）
Time 25℃ to peak temperature
Copyright ©2012
16
Curve characteristics
Solder paste
Min preheating temp.
Mx preheating temp.
Preheating time
Average ramp-up rate
Liquid phase temp.
Time below liquid phase line
Peak temp.
Aveage ramp-down rate
Time to peak temperature for
25℃
– 2018 ，
Sn-Pb Assembly
Sn63/Pb37
100℃
150℃
60-120 sec
3℃/second max
183℃
60-90 sec
220-235℃
6℃/second max
max 6 minutes
Chengdu Ebyte
E30-433T20S3 User manual
Pb-Free Assembly
Sn96.5/Ag3/Cu0.5
150℃
200℃
60-120 sec
3℃/second max
217℃
30-90 sec
230-250℃
6℃/second max
max 8 minutes
Electronic Technology Co.,Ltd.