Aux Description; Indication Of Uart Output; Indication Of Wireless Transmitting - Ebyte E30-433T20S3 User Manual

Smd serial port wireless module

Hide thumbs Also See for E30-433T20S3:

Table of Contents

Chengdu Ebyte Electronic Technology Co., Ltd.

5.6 AUX description

AUX Pin can be used as indication for wireless send & receive buffer and self-check.



It can indicate whether there are data that are not sent yet via wireless way, or whether all wireless data has been



sent through UART, or whether the module is still in the process of self-check initialization.

To wake up external MCU



Buffer (empty): the internal 512 bytes data in the buffer are written to the RFIC (Auto sub-packaging). When

AUX=1, the user can input data less than 512 bytes continuously without overflow. Buffer (not empty): when AUX=0,

the internal 512 bytes data in the buffer have not been written to the RFIC completely. If the user starts to transmit data at

this circumstance, it may cause overtime when the module is waiting for the user data, or transmitting wireless sub

package. When AUX = 1, it does not mean that all the UART data of the module have been transmitted already, perhaps

the last packet of data is still in transmission.

E30-433T20S3 User manual

Table of Contents