Channel Management; Adding An Ip Camera By Auto-Add - UNV NVR202 Series Quick Manual

Channel Management

Make sure the IP cameras you want to configure are connected to your
device through the network.

Adding an IP Camera by Auto-add

NOTE!
The device with PoE ports or switching ports does not support the

Auto-Add operation.
If there is more than one device in the network, do not enable

Auto-Add IP Camera. Add IP cameras by search or manually.
1. Click Menu > Channel > Channel.
2. Enable Auto-Add IP Camera and click OK. And then the IP
cameras in the same network are added automatically.
12