Table of Contents
Advertisement
The Wizard is described as follows:
Change Password: The default password is "123456".
IP Camera: Search for and add IP cameras in the same network
segment.
NOTE!
The IP Camera window will be displayed if you do not select Enable
IP Camera auto-add function. If you select Enable IP Camera
auto-add function, the IP Camera window will not display.
By default, all the found IP cameras can be added if the number
is within the allowed limit. If the status of an IP camera is
Connected, it means the camera is added successfully. If the status
is Disconnected, check whether the network connection is normal
or the username and password of the camera are correct.
Storage: a 24-hour recording plan is enabled for all the channels
by default. You can choose a channel and set the recording type
as needed.
You can use the preview function after the Wizard completes, but you
need to log in first to use other functions. The default username is
"admin", and the default password is "123456".
11
Advertisement
Table of Contents
