Toshiba BMS-IWF0320E Installation Manual page 5

Smart device control interface
(Power adapter) (BMS-IWF0320E only)
REQUIREMENT
• Power cable is not supplied for the BMS-IWF0320E. Insert a two core power cord applicable to the standard of the country
you use.
• Power adapter is not supplied for the BMS-IWF0320IN. Prepare power adapter that confirms to specification of BMS-
IWF0320IN.
Specifications
• Output: DC 5 V ± 5%
• Current: 2 A to 3 A
• DC Plug
2.1 mm Ø (inner diameter)
5.5 mm Ø (outer diameter)
9.5 mm (length)
• Use a power adapter that complies with BIS standards.
We also recommend that the power adapter complies with safety designs (EN60950), EMI standards (EN550022 and
EN61000-3), and EMS standards (including EN550024 and EN61000-4).
• Supplying power other than 5 V may cause malfunctions.
1800±100
68.2 26.3
Installation Manual
9.5±0.5
TOOLING NO.:SU-B80035-01
EN
5-