Compact Chopper/Grinder Safety; Before Using For The First Time - Kenwood FDP64 Instructions Manual

mini bowl and knife safety
Never remove the lid until the knife blade has completely stopped.
l
The knife blade is very sharp - always handle with care.
l

compact chopper/grinder safety

Never fit the blade unit to your food processor without the lid fitted.
l
Never unscrew the lid while the compact chopper/grinder is fitted to your
l
appliance.
Do not touch the sharp blades – Keep the blade unit away from children.
l
Never remove the compact chopper/grinder until the blades have completely
l
stopped.
To ensure the long life of your compact chopper/grinder, do not run it
l
continuously for longer than 60 seconds. Switch off as soon as you have got
the right consistency.
The appliance will not work if the compact chopper/grinder is incorrectly fitted.
l
Do not process turmeric root in the compact chopper/grinder as it is too hard
l
and may damage the blades.
Do not process hot ingredients in the mill. Allow to cool down to room
l
temperature before processing.
before plugging in
Make sure your electricity supply is the same as the one shown
l
on the underside of your appliance.
Important – UK only
The wires in the cord are coloured as follows:
l
Blue = Neutral, Brown = Live.
The appliance must be protected by a 13A approved (BS1362)
l
fuse.
Note:
For non-rewireable plugs the fuse cover MUST be refitted when
l
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED
l
IMMEDIATELY. An electric shock hazard may arise if an
unwanted non-rewireable plug is inadvertently inserted into a 13A
socket outlet.
This appliance conforms to EC Regulation 1935/2004 on
l
materials and articles intended to come into contact with food.

before using for the first time

1 Remove the plastic blade covers from the knife blade. Take
care the blades are very sharp. These covers should be
discarded as they are to protect the blade during manufacture
and transit only.
2 Wash the parts see 'care & cleaning'
4