Page 1
Woody Log Loader Operator’s Manual Pignon Models 115- 130- 150- 170 HD and telescopic models. Woody Equipment Inc., 205 rue Commercial, Saint-Odilon-de-Cranbourne, Quebec, Canada G0S3A0 T. (418) 464-2748 F. (418) 464-2746 Email: ewoody@sogetel.net <mailto:ewoody@sogetel.net> Website: www.equipementswoody.com <http://www.equipementswoody.com/> Facebook: Equipements Woody...
Page 2
Email: ewoody@sogetel.net <mailto:ewoody@sogetel.net> Website: www.equipementswoody.com <http://www.equipementswoody.com/> Facebook: Les Equipements Woody Woody Equipment Inc. C All Rights Reserved: Woody Equipment Inc. of Saint-Odilon-de-Cranbourne. No part of this manual may be reproduced in any form without the written permission of Woody Equipment Inc.
Page 3
Table des matières Introduction................1 Avertissement..............2 Caractéristiques de la machine 115HD......3 Table premier niveau 115HD..........4 Caractéristiques de la machine 130HD......5 Table premier niveau 130HD..........6 Caractéristiques de la machine 130HDT......7 Table premier niveau 130HDT..........8 Caractéristiques de la machine 150HDT......9 Table premier niveau 150HDT........10 Caractéristiques de la machine 170HDT......11 Table premier niveau 170HDT........12 Caractéristiques de la machine 170HD......13...
Page 4
These instructions contain important information on safety and efficiency and to ensure the validity of the factory guarantee. Woody Equipment reserves the right to modify and / or improve its equipment and maintenance instructions, as well as to revise data without notice.
Page 5
Warning The following symbols used in this manual are to warn the operator of the dangers connected to the use of this machinery. Follow the safety instructions to avoid any risk of serious injury or death.
Page 6
115 HD Loader models pinion Parts list DETAIL G DETAIL F DETAIL E DETAIL D DETAIL C SCALE 2 : 29 SCALE 2 : 29 SCALE 2 : 29 SCALE 2 : 29 SCALE 2 : 29...
Page 7
115 HD Loader models pinion Parts list Item Description Part # 60-044-01 Loader A-Frame 60-044-02 Loader column 60-012-05 Loader stabilizers 60-012-06 Loader stabilizers 60-044-04 Loader main boom 60-021-04 Loader stick boom Loader main boom pin 115- 60-012-08 Loader stick boom pin 115-...
Page 8
130 HD Loader models pinion Parts list DETAIL L DETAIL J DETAIL H DETAIL M DETAIL K SCALE 1 : 16 SCALE 1 : 16 SCALE 1 : 16 SCALE 1 : 16 SCALE 1 : 16...
Page 9
130HD Loader models pinion Parts list Item Description Part # 60-036-03 Loader column 130HD 60-018-03 Loader main boom 130 HD 60-018-04 Loader stick boom 130HD 60-006-09 Loader main boom pin 130 ,150 & 170HD 60-006-08 Loader stick boom pin 130 ,150 & 170HD 60-036-01 Loader A-Frame 130 HD 60-018-05...
Page 10
130 HDT Loader models pinion Parts list DETAIL N DETAIL T DETAIL P DETAIL U DETAIL R SCALE 1 : 15 SCALE 1 : 15 SCALE 1 : 15 SCALE 1 : 15 SCALE 1 : 15...
Page 11
130 HDT Loader models pinion Parts list ITEM Description Part # 60-036-03 Loader column 60-030-02 Loader main boom 130 HDT 60-030-01 Loader stick boom 130 HDT 60-006-09 Loader main boom pin 130 ,150 & 170 60-006-08 Loader stick boom pin 130 ,150 & 170 60-030-09 Telescopic boom 60-061-01...
Page 12
150 HDT Loader models pinion Parts list DETAIL W DETAIL V DETAIL AB DETAIL AA DETAIL Y SCALE 2 : 37 SCALE 2 : 37 SCALE 2 : 37 SCALE 2 : 37 SCALE 2 : 37...
Page 13
150 HDT Loader models pinion Parts list Item Description Part # 60-052-01 Loader A-Frame 170 HD 60-058-03 Loader column 150 HDT 60-031-02 Loader main boom 150-HDT 60-031-01 Loader stick boom 150-HDT 60-031-06 Telescopic Loader main boom pin 130 60-006-09 ,150 & 170 Loader stick boom pin 130 60-006-08 ,150 &...
Page 14
170 HDT Loader models pinion Parts list DETAIL AG DETAIL AD DETAIL AC DETAIL AF DETAIL AE SCALE 1 : 16 SCALE 1 : 16 SCALE 1 : 16 SCALE 1 : 16 SCALE 1 : 16...
Page 16
170 HDT Loader models pinion and with seat Parts list DETAIL AK DETAIL AM DETAIL AL DETAIL AJ DETAIL AH SCALE 2 : 37 SCALE 2 : 37 SCALE 2 : 37 SCALE 2 : 37 SCALE 2 : 37...
Page 17
170 HDT Loader models pinion and with seat Parts list Item Description Part # 60-020-13 Loader A-Frame 170-HDT 60-020-12 Loader column 60-018-05 Loader stabilizer 60-018-06 Loader stabilizer Tray with seat and 60-020-14 control support 60-032-01 Loader stick boom 170-HDT Loader main boom pin 130 60-006-09 ,150 &...
Parts list Grapple 36'' Item Description Parts # 57-002-01 Grapple 36" center 57-002-02 Little finger grapple 57-002-03 Wide finger grapple 57-002-03 Side plate grapple 86-16-120 Rod 1'' O.D. 86-16-140-E14-00- Rod 1'' O.D. E126-00 86-16-154-E14-00- Rod 1" O.D. E138-00 Hydraulic cylinder 2 1/2" Dia. x 120272 6"...
Parts list Grapple 52'' Item Description Parts # 57-004-04 Side plate grapple 57-004-01 Grapple 52'' center 57-004-13 Wide finger grapple 57-004-12 Little finger grapple 86-20-152 Rod 1 1/4" O.D. 86-24-166-E18-00-E148-00 Rod 1 1/2" O.D. 86-24-177-E14-00-E163-00 Rod 1 1/2" O.D. 96-28-20-12-E06-00 1 3/4"...
Page 20
Parts list Winch 6000lbs Item Description Part# 58-007-02 Winch head 58-000-04 Swivel head fixation- large, medium, small 58-000-05 Winch roller- large, Medium 58-007-03 Cable tensioner pin 58-000-06 Winch fixed cluth- Large, Medium, Small 58-000-07 Winch fixed cluth- Large, Medium, Small 58-000-08 Clutch arm- Large, Medium 58-000-01...
Page 21
Parts list simple directional Item Description Parts # 59-003-08 Hitch 59-076-24 Simple directional frame 59-076-08 Pivot lock 59-076-09 Deck span 9.5 59-076-04 Pivot lock 59-076-02 Pivot simple directional 59-076-035 washer 120442 Hydraulic cylinder 3" Dia. x 16" Stroke 59-076-034 Washer 301020 Bolt 7/8"-9 x 3 1/2"...
Stop all operations immediately if any bystanders enter the work zone (20 Woody loaders are intended for normal use in the agricultural and forestry sectors. They must be used only by persons trained in the handling of this type of machinery.
Safety Instructions If the overload protection of the hydraulic system is not properly adjusted or certain system functions are altered, safety cannot be ensured. . Always lower the hydraulic stabilizers before each operation to avoid overturning. . Always check that any unauthorized personnel remains outside the work risk area. .
Page 25
Safety Instructions Driving on the Road Observe the following instructions to avoid any risk of accident. Position during Transport . If there is no load, position the loader boom as low as possible on the trailer. Make sure that the grapple and the rotator are firmly attached to the trailer, so that there is no risk of the loader rolling over during transport.
Page 26
Safety Instructions Welding Repair . If a repair or modification requires the welding of certain parts, you must first contact your dealer for necessary instructions. Improper welding or negligence during welding can cause sudden machine breakdowns. Working in Extreme Conditions The recommended ambient temperature for the operation of this machine is between -20 °...
Page 27
Safety Instructions Maintenance and Servicing Safety Instructions . Hot oil can cause burns. Inhalation of hot oil vapor can cause breathing difficulties. . If a hose bursts and you get oil on your skin, it is not dangerous. However, avoid oil contact with eyes and nose. If you get oil in your eyes or in your respiratory tract, contact a doctor immediately.
Page 28
Safety Instructions Greasing points and intervals DETAIL AG SCALE 2 : 21 By prevention, remove the cap once a year, tighten the castellated nut, fill the cap with grease and replace the cap! Greasing Interval Item Greasing point Lubricating oil hourly / yearly Telescopic stabilizer Bushing grease...
Page 30
Regularly monitor tire pressure and increase air pressure as needed based on written tire specifications. By prevention, remove the cap once a year, tighten the castellated nut, fill the cap with grease and replace the cap! Greasing Interval Item Greasing point Lubricating oil hourly / yearly Posts...
Page 31
Maintenance and safety instructions for proper use of the 6000 lb. hydraulic winch Grease every 4 hours of use with bushing grease. Caution: Risk of crushing your finger or hand and could even lead to death!!!
Page 32
Maintenance and safety instructions for proper use of a double drawbar Grease every 4 hours of use with bushing grease Make sure that no one is standing in the perimeter and also make sure no one is standing on the step!
Page 33
Safety Instructions Storage If you plan to stop using the loader for a long period of time, it should be cleaned carefully. Note that high pressure cleaning is not recommended! After cleaning, make a visual inspection for any cracks (if you find any, you must have them repaired before the next use of the loader) all grease nipples must be lubricated.
Need help?
Do you have a question about the 115 HD and is the answer not in the manual?
Questions and answers