Sparkfun Electronics Inventor's Kit Manual page 70

While the image shows black momentary pushbuttons, you can use any colored button as long as it
Troubleshooting
No Sound
Given the size and shape of the piezo buzzer, it is easy to miss the right holes on the breadboard.
Try double-checking its placement.
Also, double check to make sure the push button is wired correctly. If you miswired it, then the circuit
will never be completed even if you press the button or not.
Feeling Let Down and Deserted
Create your own song using just the tone blocks rather than the standard song options given from
the block.
start melody
Experiment 10: Using the Accelerometer
Introduction
In this experiment you will look at combining the use of the accelerometer on the micro:bit to
measure the orientation of the micro:bit and use it to control the angle of a servo.
Ready to shake, rattle and roll?
Parts Needed
You will need the following parts:

1x micro:bit

1x Micro B USB Cable

1x micro:bit Breakout (with Headers)

1x Breadboard

5x Jumper Wires

1x Servo
is momentary pushbutton to trigger the sounds!