Sparkfun Electronics Inventor's Kit Manual page 2

SparkFun Inventor's Kit for micro:bit Lab Pack
L A B - 1 4 3 0 1
Included Materials
The SparkFun Inventor's Kit (SIK) for micro:bit includes the following:

micro:bit — The brains of the outfit with a bunch of onboard components.

micro:bit Breakout (with Headers) — Allows you to connect the micro:bit to the
breadboard.

Breadboard — Excellent for making circuits and connections off the micro:bit. We included a
full-sized breadboard to give you plenty of room.

Small Servo — Here is a simple, low-cost, high-quality servo for all your mechatronic needs.

Piezo Buzzer — BUZZZZ! Used to make different frequencies of sound.

USB micro-B Cable — This 6-foot cable provides you with a USB-A connector at the host
end and standard B connector at the device end.

Male-to-Male Jumper Wires — These are high-quality wires that allow you to make
connections with components on the breadboard.

TMP36 Temperature Sensor - A sensor for detecting temperature changes.

Photocell — A sensor to detect ambient light. Perfect for detecting when a drawer is opened
or when nighttime approaches.

Tri-Color LED — Because everyone loves a blinky.