Courtesy of:DiscountCarStereo.com AUX-CH3 Auxiliary input Jack Installation Guide for CHRYSLER with External Changer or Sirius Revised October 30, 2015...
Page 2
Introduction: Connect the factory 10-way plug removed in step 1 to the 10- Many Chrysler owners with Sirius Radio and/or External CD way connector on the adapter harness (See Fig. See Fig. See Fig. See Fig. 3 3 3 3 ) ) ) ) Changers will be pleased to know that it is no longer necessary to disconnect these options in order to connect an auxiliary device.
Page 3
Drill a ¼” hole in the dash, push the aux jack threated end Test Operation Test Operation: : : : Test Operation Test Operation through the hole and tighten the nut (See Fig. 5 Fig. 5 Fig. 5 Fig. 5) Turn the Radio “ON”...
Need help?
Do you have a question about the AUX-CH3 and is the answer not in the manual?
Questions and answers