Setting Up Your Housing; Opening The Housing - Ikelite 6170.12 Instructions Manual

15. Set White Balance to "AWB." When recording video or shooting
stills images without a strobe, AWB can still be used, but for more
accurate and consistent colors we recommend setting Custom
white balance "
DO NOT open the camera flash until AFTER the camera has
been installed in the housing front. Once the housing back is
attached and closed, the camera flash CANNOT be opened.
All camera user settings not listed should be set to the user's
preference. Adjust settings as necessary for each shooting
situation.

Setting Up Your Housing

Opening the Housing

1. Push the lid snap lock forward and start to lift the curved end away
from the housing.
2. Lid snaps are designed to provide enough force to compress the
o-ring for a proper seal. Keep firm pressure against the lid snap
while lifting it away.
3. Repeat with remaining lid snaps.
4. Remove the housing back.
."
1
Lid Snap Lock
9