Zoom And Macro Close-Up - Ikelite 6170.12 Instructions Manual

3. Attach one end of the fiber optic cord into one of the fiber optic ports
on the front of the housing. The connector is a press-fit into the fiber
optic port.
4. Attach the other end of the fiber optic cord to a compatible strobe.
5. Set the strobe to the appropriate setting based on manufacturer
recommendations.
6. Turn the camera on and then the strobe(s).
7. Take a test photo to ensure proper functioning properly.

Zoom and Macro Close-up

The optional WD-4 Wide Angle Dome provides a wider angle of
view underwater without the edge distortion, heaviness, or difficult
attachment typically associated with an external wide angle lens. The
WD-4 is a 0.75x magnification factor and simply slides on and off of
the housing lens port.
A press-fit Macro Adapter is available for the attachment of 67mm
threaded accessory macro lenses. We recommend a macro lens
which is designed for underwater use like those from Epoque, INON,
Subsea, Nauticam, and other manufacturers. The adapter should not
be used with 67mm threaded wide angle lenses. The wide angle lens
would be too far away from the camera's lens to provide an improved
image.
14
Fiber Optic Cord
O-ring