Meridian DSP750 User Manual page 8

DSP In-wall Digital Active Loudspeaker User Guide
Construction
The DSP750 is designed to have an elegant profile, with only
102mm installation depth.
It is made up of a narrow, self-contained, all-metal enclosure
with a metal mounting frame. Its purpose-built rough-in wall-box
is available separately. The rough-in box is first fitted to the wall,
the frame is mounted to it, and the loudspeaker enclosure is
then bolted to the frame.
The rough-in box and frame can be adjusted for various wall
materials and depths. The frame is designed for mounting into
new-build partition and stud style walls or for retrofitting into
stud or brick/stone-built walls.
A male-to-female IEC mains lead is supplied with the
loudspeaker in order to connect it to the rough-in box, which
is wired to power.
The paintable, perforated steel grille supplied with the
loudspeaker can be fitted where required. The grille is held in
place by powerful rubber-coated magnets which are attached
to the aluminium extrusion that forms the front panel of the
loudspeaker enclosure.
Controlling the loudspeaker
The loudspeaker can be controlled in three ways:
•
In most installations, the loudspeaker will be controlled by
another Meridian product within the system.
• Alternatively, the loudspeaker features an infra-red receiver
which allows it to be controlled using a Meridian System
Remote.
•
Thirdly, the loudspeaker can be controlled using RS232
commands.