Meridian DSP750 User Manual page 26

In-wall Digital Active Loudspeaker User Guide
DSP
Configuration
These commands affect only the connected loudspeaker. They
configure features of the loudspeaker that would otherwise be
inaccessible without a SpeakerLink capable controller.
Command Type Code
2
IR receiver IR
Speaker position BO
Subwoofer SW
SG
The settings made are non-volatile (ie they remain when the
loudspeaker is powered down). These settings can override
commands from a SpeakerLink controller, so they should
be used with caution. To restore SpeakerLink control, choose
the SL parameter.
Meaning
Parameters
ON Turns on IR receiver eye
OFF Turns off IR receiver eye
SL Boundary EQ controlled by Speakerlink
FR Free-space equalization
WA Wall equalization
SH Shelf equalization
CO Corner equalization
SL Subwoofer Controlled By Speakerlink
OFF Subwoofer Off
1 Subwoofer Crossover
2 Subwoofer Crossover
WI Subwoofer Wideband
+/–## Subwoofer Gain
Example Response
IR on
IR off
NV Boundary Speakerlink
3 NV Boundary Free
NV Boundary Wall
NV Boundary Shelf
NV Boundary Corner
NV Subwoofer Speakerlink
NV Subwoofer Off
1 NV Subwoofer Sub 1
1
NV Subwoofer Sub 2
NV Subwoofer Speakerlink
4
NV Sub Gain 12