Meridian DSP750 User Manual page 28

In-wall Digital Active Loudspeaker User Guide
DSP
Utility/diagnostic
Code Meaning
IR2 Infra-red receiver status
Cm Centre mode status
ID Identity
Reset
!R
Notes
1. When in standby, a source selection command may be
followed by sb (e.g. CDsb). This allows e.g. a connected
Distributor to change source, but the speakers will
remain in standby.
2. Available only on Meridian DSP320, DSP520, DSP640
and DSP750.
3. Free-space equalization is not available on in-wall
loudspeakers.
4. The non-volatile subwoofer gain is only used when the
non-volatile subwoofer setting is not SL. The range is -15
to +15 in 1dB steps.
Response
IR on/IR off
A text description of the status
A list of product name and versions
Bye
5. The non-volatile room height is only used when the
non-volatile EBC setting is not SL. The range is 150 to
400cm in 1cm steps.
6. Centre mode applies only to Meridian DSP520.2, DSP640.2
and DSP750
7. Music/Movie mode applies only to the Meridian DSW.