5. Fit the loudspeaker
•
Using the grab handle, sit the loudspeaker on the lower
edge of the wall box.
•
Plug in the RJ45 cable(s) and AC supply.
•
With the aid of the grab handle, slide the loudspeaker into
position, inserting the top of the loudspeaker into the wall
box first.
•
Fix with M5 x 20mm guide-in screws (12 pieces).
•
Remove the grab handle to fit the last pair of screws.
This is no longer required.
DSP
In-wall Digital Active Loudspeaker User Guide
Guide-in screws
(M5 x 20mm)
uide screws
(M5 x 20)
LINEAR:
ANGULAR: