Daikin ROTEX GW-20 H12 Installation Instructions Manual page 47

8.3.9 A-label pump LED flashes intermittently red/green
Possible causes:
Too high or too low mains voltage.
No
Pump temperature is too high.
8.3.10 A-label pump LED flashes red
Possible causes:
Pump stopped.
Solution:
Yes Check the mains voltage.
Yes Check the water and ambient temperature.
Solution:
Reset the pump by switching off the unit by pressing the on/off button for at least 20
seconds (attention: if the pump has been set to continuous, the pump can only
Yes
be reset by pulling the plug from the socket).
Replace the pump.
48