Actuator Systems NextBolt User Manual page 12

www.BuilderDepot.com
http://www.advancedactuators.com
IF YOUR DOOR THICKNESS DOES NOT EXACTLY
MATCH ANY OF THE PRE-CUT TAILPIECES LENGTHS,
THEN YOU MUST TRIM THE PRE-INSTALLED TAIL
PIECE TO MATCH YOUR EXACT DOOR THICKNESS.
If you need to trim the tailpiece, be sure to measure the exact
thickness of your door, mark the tailpiece (with a marker) where it
needs to be cut and trim the tail piece accordingly per the exact
thickness of your door, with a hacksaw or metal cutters.
Notes:
The motor could be dislodged if the tailpiece is not cut properly and
is too long, due to excessive pressure. Warranty will be voided if
this occurs.
NextBolt User Manual 12
For support contact us a 1-800-408-7101 ext. 102