12
Preface
System Requirements
Before you install the Mobile Adapter 2201, check your system for the following:
•
•
Status LEDs
There are two Status LEDs on the Mobile Adapter 2201. You can check your
network connectivity status by looking at the LEDs.
Table 1 Status LEDs
Status
Off
Slow Blink
Fast Blink
Alternate Blink between LEDs
One LED Blink
One LED Steady Light
214695-B
A laptop PC contains:
— 32-bit Cardbus slot
— 64 MB memory or greater
— 300 MHz processor or higher
Microsoft Windows 2000 or Windows XP (Prepare the Windows installation
CD-ROM for use during installation; some versions of Windows require you
to have administrator privileges)
Description
Power is off.
A connection is made. There is no activity yet.
There are activities in a connected network.
Look for a network association.
Power Saving Mode is on.
Awake from Power Saving Mode.