Privacy Control 10 Restriction Override 10 Ring Again 10 Reply To a Ring Again Signal 10 Saved Number Redial 11 Send Message 11 Service Mode 11 System Speed Dial 11 Tones 11 P0908546 Issue 01 Enterprise Edge ATA 2 User Guide...
Page 4
Trunk Answer from any Telephone 13 Voice Call 13 Data Communication 15 Set Tones to OFF 15 Auto-answer Modems and Answering Machines 15 Modem and FAX Transmission Compatibility 15 Troubleshooting for Data Applications 17 Enterprise Edge ATA 2 User Guide P0908546 Issue 01...
If your telephone does not have a • or £ button, you must use dialpad numbers. To indicate a • press ⁄. To indicate a £ press ‹. For more information about feature operations, accessing feature operations or feature codes, see your System Administrator. P0908546 Issue 01 Enterprise Edge ATA 2 User Guide...
˚•‡fl <plus the ringing number> Allows you to answer a ringing telephone within your Enterprise Edge system. Call Pick-up (Group) ˚•‡fi Allows you to answer any ringing telephone within your Enterprise Edge pick-up group. P0908546 Issue 01 Enterprise Edge ATA 2 User Guide...
Allows you to put the two conferenced parties on hold. The held callers are still conferenced. To put the conference on hold: 1. Press ˚¤ to put the two conferenced parties on hold. 2. Press ˚¤ to restore the three-way call. Enterprise Edge ATA 2 User Guide P0908546 Issue 01...
1. Press ˚¤. Hotline Allows you to automatically call a programmed internal or external telephone number. To use the Hotline feature, lift the handset of the designated hotline telephone. P0908546 Issue 01 Feature List 9 Enterprise Edge ATA 2 User Guide...
You must press a paging zone. For a list of page zones, see your System Administrator. Page (Intercom) ˚•fl⁄ <plus zone code> Page (External) ˚•fl¤ Page (Intercom/External) ˚•‹ <plus zone code> Enterprise Edge ATA 2 User Guide P0908546 Issue 01...
1. Lift the handset. The ring again number is automatically redialed. Note: If you do not respond to a ring again signal within 30 seconds, ring again is canceled. P0908546 Issue 01 Feature List 11 Enterprise Edge ATA 2 User Guide...
Tones signal you about the progress of certain features. To cancel tones, press ˚£°‚·. Note: Tones must be OFF when Enterprise Edge ATA 2 is used with a data communication device such as a FAX or modem. Enterprise Edge ATA 2 User Guide P0908546 Issue 01...
2. Call your co-worker. Tell your co-worker the flashing line appearance is a call for them. 3. Replace the handset. Note: Your co-worker must have an Enterprise Edge telephone with line appearance. P0908546 Issue 01 Feature List 13 Enterprise Edge ATA 2 User Guide...
Voice Call ˚•flfl <plus the intercom number> Allows you to make a voice announcement or begin a conversation through the speaker of a digital telephone without making the other telephone ring. Enterprise Edge ATA 2 User Guide P0908546 Issue 01...
When connected to Enterprise Edge ATA 2, the Enterprise Edge server supports data transmission rates up to and including 28.8 kbit/s. Note: The maximum data transmission rate is subject to the quality of the end-to- end channel and cannot be guaranteed. P0908546 Issue 01 Enterprise Edge ATA 2 User Guide...
4. Substitute a single line telephone for your data communication device. If you receive a dial tone on the single line telephone, the problem can be with the data communication device. P0908546 Issue 01 Alternate Line on page 6 of the Feature List. To...