Table of Contents 1. Keyboard Features 2. Software Features 3. Keyboard Specifications 4. Package Contents 5. The SHARK ZONE K30 at a Glance 5.1 Lighting Effect 5.2 Profile Keys 5.3 Macro Keys 5.4 Function Keys with Preset Multimedia Actions 5.5 Other Shortcuts 6.
3. Keyboard Specifications Switch Technology Rubber Dome Connector Cable Length 160 cm Input Voltage Operating Life Cycles of Keys Min. 10 Million Keystrokes Operating Temperature 0 °C to +40 °C Storage Temperature -10 °C to +50 °C SHARK ZONE K30...
(D) SHARK ZONE Function Key (E) Function Keys with Preset Multimedia Actions (F) LED Status Display Some SHARK ZONE K30 keys are preset with additional functions. These functions can be activated by pressing the SHARK ZONE Function Key (D). ...
5.1 Lighting Effect (A) To adjust the lighting effect of the SHARK ZONE K30, press the SHARK ZONE Function Key + Esc (A) key. By pressing the Esc (A) key multiple times you can either adjust the light intensity, select the pulsating effect or disable the light (50%, 100%, pulsating, off).
2. The operating system will automatically recognize the SHARK ZONE K30 keyboard and install all necessary drivers. 3. If the SHARK ZONE K30 is not recognized, disconnect it and try a different USB port on your PC. 7. Installation of the Gaming Software Before starting with the installation of the included Gaming Software, ensure that there is no other keyboard software is installed on your PC.
Note: The gaming software runs continuously in the background while your PC is running. This is necessary to ensure all functions of the SHARK ZONE K30 are always available. The SHARK ZONE K30 icon will stay displayed in the taskbar while the gaming software is running.
The Main Control tab is where you can create, edit or save your Game Profiles or make single key assign- ments that suit your personal needs. Access to the Macro Settings and Advanced Settings is also available. If necessary, you can also reset all settings to factory default. SHARK ZONE K30...
Page 9
(A) Click to select the desired profile. An active profile is highlighted in yellow. All changes must be confirmed by clicking the “Apply” button. (B) Create, edit, save or load a profile. (C) Launch the Macro Manager. (D) Every single key can be individually assigned. (E) Reset all settings to factory default. SHARK ZONE K30...
The game profile is now setup and can be saved in the Main Con- trol. Note: If a game or application has been assigned to more than one profile, then the lowest numbered profile will be activated. SHARK ZONE K30...
Assign a file name and save the Game Profile in .gkp format. Note: As a default setting, all Game Profiles will be saved into the “config” folder within the SHARK ZONE K30 installation folder, however, you can still select an alternative location to save your profiles.
Macro Manager. Your first input is shown at the top of the list. Changes can be made by pressing the right mouse button within the column “Keystroke Sequence”. Make your selections (e.g. recording further keystrokes, insert or edit delay time, insert mouse event). SHARK ZONE K30...
Select an item within the keystroke sequence where you want to add a mouse event before. By clicking the right mouse button, the selection menu opens. Select “Insert Mouse Event”, then afterwards, the mouse button and the required action. SHARK ZONE K30...
In case the deleted macro is still assigned to a key within the Macro Settings you need to reset the key (see 9.1.5). Otherwise the macro will be still saved in the onboard memory of the keyboard. 8.9 Reset to Factory Default This function resets all profile and macro settings to the factory default. SHARK ZONE K30...
To assign a new function, move the pointer into the box next to the key and click the left mouse button. A selection menu with the available functions will open (e.g. Assign Macro, Media Player, Mouse, etc.). SHARK ZONE K30...
This function allows you can assign a shortcut to a single key. Combinations of multiple keys (e.g. Ctrl + Alt + Del) is also possible. Confirm your selection by clicking “Apply“. 9.1.7 Launch Program You can select a program to be launched when the specific key is pressed. Confirm your selection by clicking “Apply”. SHARK ZONE K30...
The lighting effect can also be changed directly via the keyboard by pressing the key combination SHARK ZONE Function Key + Esc. The Windows Key can be deactivated directly via the keyboard by pressing the key combination SHARK ZONE Function Key + F12. SHARK ZONE K30...
Page 18
Legal Disclaimer: For potential loss of data, especially due to inappropriate handling, SHARKOON assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice.
Need help?
Do you have a question about the Shark Zone K30 and is the answer not in the manual?
Questions and answers