LG LV30 Z Series Installation Manual page 13

- Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
y The modes are as follows:
y
» Aspect ratio = "Disable(0)" stays at previous state, same as consumer model.
» Aspect ratio = "Original(1)"
» Aspect ratio = "4:3 ratio (2)"
» Aspect ratio = "16:9 ratio (3)"
y If enabled, upon power up the television reset the aspect ratio to the specified state regardless of how
y
the user has previously changed the aspect ratio.
(if "original" is not supported, the television set the aspect ratio to "16:9".)
9 Aux Source Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When 'Aux Source
Setting' is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate.
- Input Source
y Available Input Source List
y
- Setting
y Decide whether selected 'Input Source' is usable (Enable) or not (Disable).
y
y User cannot disable the current input's 'Aux Source Setting'.
y
10 Radio Name Display
Instead of 'Audio Only', the name of a radio channel is displayed on the screen when a radio broadcast is
playing.
y Set to Yes(Work) or No(Do Not Work).
y
y If the setting is 'Yes', the name of a radio channel is displayed for the radio channel.
y
y For LV5**H series, this function is available in CONFIGURATION SETUP.
y
11 Radio Video Blank
Manage video blank channel(sound only). This feature affects on analog channel (ATV) only.
- Start PR. No.
y Start channel number to video blank.
y
y Available programme to set are 0~199(For Taiwan : TV 2~69, CATV 1~199).
y
- No. Of. PR.
y Number of channels to blank
y
y The max value for the 'No. of PR' is 10.
y
y Can not set more than maximum available channel number. For example if Start PR. set to 195, "Number
y
of PR". can not set more than 5.
y Radio programme should be in sequence with starting programme number.
y
12 Factory Reset
Factory reset returns all the parameters to the default settings.
• Factory Reset
y Press 'Enter key' to proceed factory reset. and confirmation message window will be shown.
y
All user settings and channel
settings will be reset. Still
Continue?
Yes
No
y When select 'Yes', all television settings except UTT value should write to the default settings.
y
Confirm
INSTALLATION MENU 13