Inserting & Removing Batteries - SiPix SP 1300 Owner's Manual

Table of Contents

Advertisement

1.
Set the Power Switch to
2.
To open the battery compartment cover on the bottom of the camera, slide the entire cover
in the direction indicated by the arrow on the cover; the cover "springs" open.
3.
Note the battery polarity on the inside cover. Insert the batteries in the battery
compartment accordingly.
4.
Close the battery compartment cover by pressing down and sliding it until it clicks shut.
Note: Use only AA alkaline, lithium, or rechargeable NiMH
batteries. Inserting the batteries with the incorrect polarity might
damage the camera or the batteries.
Battery display
Battery icon
Meaning
The batteries have a full charge, or the AC adapter is connected.
The batteries have approximately 50% power left.
The batteries have approximately 25% power left.
The batteries are almost empty. Replace the batteries with fresh ones.
.
OFF
Note: Digital Cameras place heavy loads on batteries. Use
rechargeable NiMH batteries instead of regular batteries to extend
battery life. Also, use an AC adapter whenever possible.
I
n
s
e
r
t
i
n
g
&
I
n
s
e
r
t
i
n
g
&
6
R
e
m
o
v
i
n
g
B
R
e
m
o
v
i
n
g
B
a
t
t
e
r
i
e
s
a
t
t
e
r
i
e
s

Advertisement

Table of Contents
loading

Table of Contents