Getting Started; Attaching The Strap; Inserting Batteries - SiPix StyleCam Pro Owner's Manual

5. Getting Started

5-1 Attaching the Wrist Strap
The StyleCam Pro comes with a camera wrist strap that you can use to hook onto the camera
and carry it with you everywhere you go. Please follow the instructions and the diagrams below to
hook the strap into the strap holder.
1. Insert the small loop end of strap into the strap holder.
2. Thread the other end of strap through the loop.
3. Stretch the strap tightly.

5-2 Inserting Batteries

Please follow the instructions and diagrams below to insert batteries into your StyleCam
Pro.
1. Power OFF the camera by sliding the lens cover to the right.
2. Open the battery compartment cover by sliding the cover in the direction indicated
by the arrow.
3. Note the battery polarity indication located inside the cover, and insert 2 AA
alkaline batteries or rechargeable batteries into the slot.
4. Close the compartment cover by clicking it shut.
NOTE:
If the battery power indicator shows only one bar, this indicates that the power is low.
When the battery indicator turns red, you can no longer take still images or video. Please
change battery at this time.
5-3 Inserting and Removing the Memory Card
Please follow the instructions and diagrams below to insert and to remove the memory card into
your StyleCam Pro:
11