Integrant atHand Instructions For Use/Assembly Instructions page 2

Instructions for Use
®
The atHand
walking or to support the user's bodyweight in any way.
Tray Table:
1. To adjust the tray table to the desired height:
a.
tray
b.
squeeze the handle.
2. Tray table can be folded for storage by squeezing the handle on
the far end of the tray and lowering it toward the spine.
3. For added comfort, the tray table can be rotated 45° by pulling
the far end towards the user.
Shelves:
•
The height of shelves can be adjusted by loosening the thumb
screws and raising or lowering to one of the 3 pre-set holes on
the spine. Retighten the thumb screws.
•
If more than two shelves are being used, select the highest
preset hole.
Table should not be used as a bed rail, to assist with
Lower by squeezing the handle on either side of the
table, then gently pushing down.
Raise by pushing up on the table or arm, no need to
2