Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Integrant atHand
-
Page 1: Instructions For Use
Instructions for Use Assembly Instructions Properly assembled unit with optional accessories... - Page 2 Instructions for Use ® The atHand Table should not be used as a bed rail, to assist with walking or to support the user’s bodyweight in any way. Tray Table: 1. To adjust the tray table to the desired height:...
- Page 3 • Each shelf has two cord pass-throughs for convenience. Drawers: • Drawers fit into any open shelf and are completely removable for cleaning. Handles: • Handles can be used to move the table or to hang personal items. Lights: • Lights are touch on/off, each with three levels of brightness.
- Page 4 Electrical components are safety agency listed: UL, CSA or equivalent. Warranty: At Integrant, we take great pride in the quality and craftsmanship of our products. Attention to design, materials, construction and safety is our priority. We carefully inspect your order prior to shipment.
- Page 5 Assembly Instructions Contents:...
- Page 7 Preparing for Assembly Keep the main box and unit lying flat while performing these steps. 1. Remove the base from the box and padding. Place it face down on a hard, flat surface. Purple dots should be visible. 2. Remove all inner boxes. 3.
- Page 8 Assembling the base to the spine 1. With the spine/tray assembly lying flat, hold the tray table arm in place and remove the strap. Allow the tray table to slide up the spine slowly. 2. Align the bottom of the spine with the uncovered oval shaped opening in the base.
- Page 9 2. Connect the shelves to each other by sliding the lower shelf into the rails on the bottom of the upper shelf. 3. With the unit lying flat, locate the wide slot at the bottom of the spine. 4. Place the connected shelves into the slot and slide in and up the spine.
- Page 10 8. Slide the ambient light into the rails at on the bottom of the lower shelf. 9. Plug the ambient light into any USB port. Powering Up the atHand Connect the female end of the power cord to the male inlet the base, then plug into any household outlet.
- Page 11 Enjoy your atHand Overbed Table System!
- Page 12 Manufactured by: Integrant LLC 12315 York Delta Drive North Royalton, OH 44133 440-628-9550 www.integrantllc.com U.S. Patent 9993076 16774 rev b...
Need help?
Do you have a question about the atHand and is the answer not in the manual?
Questions and answers