Integrant atHand Instructions For Use/Assembly Instructions page 10

Remove the drawer from the lower shelf and secure with the
second thumb screw from the hardware kit.
7. Replace the drawer in either the upper or lower shelf.
8. Slide the ambient light into the rails at on the bottom of the
lower shelf.
9. Plug the ambient light into any USB port.
Powering Up the atHand
1. Connect the female end of the power cord to the male inlet
on the base, then plug into any household outlet.
2. Select a position for the gooseneck light in any accessory
mounting holes. Push in then down to lock into place and plug
into any USB port.
10