Kohler 1190330-NA Installation And User Manual page 14

16. Remove the shroud screw (retain for
later use) and remove the building-in
shroud.
17. Unscrew the 2 screws securing the
Valve Legs. Remove the valve legs
from the mixer.
18. Fit the trim kit, refer to the Installation
and User Guide packed with the trim kit.
19. Single Sequential Valve Only
The Temperature Adapter must be fitted
before the trim kit.
19.1 Fit the Spline Adapter to the
cartridge.
19.2. Fit the retaining screw into the
centre of the spline adapter. Tighten
the screw.
19.3. Fit the Adapter Ring onto the
head nut.
19.4. Align the grubscrew hole with
the cutout then push the Temperature
Adapter onto the spline adapter.
19.5. Tighten the grubscrew.
20. The installation of the mixer valve is
now complete
1095640-W2-B
14
Valve
Legs
Spline
Adapter
Retaining
Screw
Adapter
Ring
Temperature
Adapter