Philips HP6490/00 User Manual page 11

1 Make sure the appliance is switched off and unplugged.
Cleaning the epilating head
Clean the epilating head after every use.
1 Make sure the appliance is switched off and unplugged.
 Remove the epilating head (Fig. 11).
Press the release button (1) and move the epilating head in the direction
of the arrow (2).
 Remove the massaging element (Fig. 1).
 Clean the epilating head, including the epilating discs and the plastic
housing (Fig. 1).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 1).
Never try to detach the epilating discs from the epilating head.
6 Reattach the massaging element to the epilating head. Then place
the epilating head on the appliance and press it until it snaps home
('click') (Fig. 15).
The epilating head only fits onto the appliance in one way.
storage
1 Store the appliance and the accessories in the pouch.
 You can also store the appliance in the stand (Fig. ).
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 16).
- The built-in rechargeable batteries contain substances that may
pollute the environment. Always remove the batteries before you
discard and hand in the appliance at an official collection point.
Dispose of the batteries at an official collection point for batteries. If
EnglisH
11