Advertisement
Available languages
Available languages
EnglisH
1
Problem
Skin irritation
occurs.
It is not
possible to
remove the
epilating head.
Possible cause
The socket to
which the appliance
is connected is not
live.
The appliance is not
switched on.
You did not attach
the epilating
head correctly.
You used the
epilator for the first
time or after a long
period of disuse.
You have applied
too much pressure
to the appliance
You did not move
the epilating head
in the right
direction.
Solution
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may
need to switch on the light to
activate the socket.
Switch on the appliance.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
('click').
Some skin irritation may occur
the first few times you use the
appliance. This is absolutely
normal and usually disappears
quickly. For tips to reduce skin
irritation, see the first section of
chapter 'Using the appliance'.
Also make sure you keep the
epilating head clean.
Do not use any pressure when
moving the appliance over skin
Press the release button and
move the epilating head in the
direction of the arrow (fig. 11)
to remove it.
Advertisement
