Starting Voice Recognition - Hyundai KONA Electric 2020 User Manual

Before starting voice recognition
• The system can recognize only
specified voice commands.
p.7-6 "Available voice commands" or the
on-screen help of the voice recognition.
• To increase the recognition rate, keep
in mind the following when saying a
voice command:
- Say a command naturally and
clearly.
- Say a command in the direction of
the microphone, keeping your body
straight in the driver's seat. The
microphone is located at the top
part of the inside rearview mirror.
• Voice recognition will end
automatically in the following
situations:
- When a call comes in or when you
make a call
- When you connect or remove a
media storage device
- When the front view or rear view
camera turns on (*if equipped)
- When you start another function
by pressing a button, such as the
[RADIO] or [MEDIA] button.
• Voice recognition will be affected by
the ambient noise in the following
situations:
- When a window or the sun roof is
open, causing a loud sound made by
the wind
- When the air conditioner or heater
is set to a high air volume level (level
3 or lower is recommended)
- While you are driving through a
tunnel
- When severe vibrations and noises
occur while driving on a unpaved or
uneven road
- When severe noises occur due to
heavy rain or a storm
7-2
Starting voice
recognition
> See
With voice recognition, you can use your
system's functions without controlling
the screen or buttons. This can help you
maintain focus while driving and avoid
any dangerous situations.
Use voice recognition to perform
functions safely and conveniently.
On the steering wheel, press the [ ]
button. Voice recognition starts with a
voice guidance.
a
b
c
Recognized command or processing
a
status
b Primary voice commands you can use
End voice recognition.
c