Aux Mode; Bluetooth Connection - Hyundai KONA Electric 2020 User Manual

AUX mode

Symptom
No sound is heard
in the AUX mode.
A distorted noise
is heard in the AUX
mode.

Bluetooth connection

Symptom
The system is not
detected on the
Bluetooth device.
The Bluetooth
device is not
connected to the
system.
Possible cause
Poor connection
Device powered
by your vehicle's
battery power
Possible cause
Pairing mode not
activated
Bluetooth
deactivated
Bluetooth error
Solution
Disconnect the cable from the AUX port and
reconnect it correctly.
Connecting the device with the power cable
plugged into the power jack may cause a
distorted noise. Unplug the device's power
cable from the vehicle.
Solution
On the Home screen, touch All Menus >
Setup > Bluetooth > Bluetooth Connection
> Add New to switch the system to pairing
mode. Then, try searching for the system
again on the device.
Activate Bluetooth on the device.
• Deactivate Bluetooth and reactivate it on
the device. Then, reconnect the device.
• Turn the device off and on. Then, reconnect
it.
• Remove the battery from the device and
reinstall it. Then, turn the device on and
reconnect it.
• Unregister Bluetooth pairing on both the
system and the device and then re-register
and connect them.
10-5