Scale Calibration
4. If the weight and weight units displayed are correct for the test weight you are using, proceed
to the next step.
If not, change the weight units as follows:
Tap the displayed weight unit. It will turn green. Then tap
from "lb" to "kg"). Tap the weight unit again to save the changes and return the display to
normal.
If not, change the weight as follows:
Tap the displayed weight. It will turn green. Then tap
position. Tap
or
[+]
5. Tap
to continue, and the following screen is displayed.
[Next]
CubiScan 125 Service Manual
First Scale Calibration Screen
to increase or decrease the selected value.
[-]
Figure 7
or
[+]
or
[Prev]
[Next]
Scale Calibration
to change the unit (e.g.,
[-]
to select your digit
1 6