Instruction Format; Default Parameter - Ebyte E43-433T13S3 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

7. Instruction format

In configuration mode（mode 2：M1=1, M0=0）, it supports below instructions on list.
( Only support 9600 and 8N1 format when setting)
No. Instruction format
1 C0 + working parameters
2 C1+C1+C1
3 C2 + working parameters
4 C3+C3+C3

7.1 Default parameter

Default parameter values：C0 00 00 18 20 00
Model Frequency
E43-433T13S3 433MHz
Copyright ©2012–2018, Chengdu Ebyte Electronic Technology Co.,Ltd.
C0 + 5 bytes working parameters are sent in hexadecimal format. 6 bytes in total and must
be send in succession. ( Save the parameters when power-down )
Three C1 are sent in hexadecimal format. The module returns the saved parameters and
must be send in succession.
C2 + 5 bytes working parameters are sent in hexadecimal format. 6 bytes in total and must
be send in succession. ( Not save the parameters when power-down )
Three C3 are sent in hexadecimal format. The module returns the version information and
must be send in succession.
Address Channel
0x0000 0x20
Illustration
Air data rate Baud rate
1.2kbps 9600
E43-433T13S3 User manual
Transmitting Powr
20
9